M3 / M4

Sort By:  
Burger Motorsports BMW wheel spacers are an excellent, cost effective way to improve handling while dramatically enhancing the look of your BMW. Our wheel spacers push your rims and tires outward for an instant "fat" aggressive look, better lateral stability, and handling.
2,100,000.00Rp.
Burger Motorsports BMW wheel spacers are an excellent, cost effective way to improve handling while dramatically enhancing the look of your BMW. Our wheel spacers push your rims and tires outward for an instant "fat" aggressive look, better lateral stability, and handling.
2,100,000.00Rp.
The BMS billet 3.75" exhaust tips are the perfect choice for dressing up your factory M exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. They can be adjusted to desired length and are equipped with set screws so they go on easily and stay in place.
4,700,000.00Rp.
Our BMS S55 replacement chargepipes are made from heavy duty aluminum and are designed with CNC flanges and a protruding lip for a secure OEM like fit. They are finished in a gloss black powder coat to match the engine bay and we've also incorporated a pre-capped 1/8" NPT bung in to each pipe. Includes replacement heavy duty couplers, hose clamps, and all hardware required for the installation.
6,100,000.00Rp.
+17 HP / +19 lbs. x ft. Torque max gains Outflows factory intake system by 46% Dual CAD-Designed Roto-Molded Intake Tubes Dual One-Piece Sealed Housings with Auxiliary Air Inlets Built-In Sight Windows Provides Easy Inspection of Filters Without Disassembly Stunning Carbon Fiber accent on driverside intake tube for that motorsport appearance Includes both Pro DRY S oil-free & Pro 5R oiled, washable/reusable performance air filters
21,000,000.00Rp.
Draw more attention under your hood with this carbon fiber accented cold air intake system. Its sealed housing delivers 48% more cold air to your V8 than your M3’s stock configuration. With a unique filter-to-housing interface and minimal parts, this system is a breeze to install.
Out of Stock
14,850,000.00Rp.
+17 HP / +19 lbs. x ft. Torque max gains (*Vehicle tested with Pro 5R air filter media) Outflows factory intake by 46% 100% twill weave carbon fiber housings and tubes Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance Serialized Black Series plate for authenticity Washable and Reusable for Multiple Cleaning Cycles
44,980,000.00Rp.
Titanium is known for its superior strength, light weight and corrosion resistance. This set of OEM style Grade 5 Titanium Lug Bolts is not only stronger than stock but weigh 45% less. A net savings of about a pound of rotating weight total. Every pound counts in racing. Available in natural titanium color, matte black, and gold. These commplement facotry and aftermarket wheels well. Great for the i3 and I8. Every pound counts.
Out of Stock
5,450,000.00Rp.
Titanium is known for its superior strength, light weight and corrosion resistance. This set of OEM style Grade 5 Titanium Lug Bolts is not only stronger than stock but weigh 45% less. A net savings of about a pound of rotating weight total. Every pound counts in racing. Available in natural titanium color, matte black, and gold. These commplement facotry and aftermarket wheels well. Great for the i3 and I8. Every pound counts.
Out of Stock
5,450,000.00Rp.
Custom billet 3.75" exhaust tips by Cockpit Auto as local choices for dressing up your factory exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. They can be adjusted to desired length and are equipped with set screws so they go on easily and stay in place.
850,000.00Rp.
BMS Wheel Spacer for BMW - 10mm (BMS-10MMWS)
BMS Wheel Spacers for BMW
  • Provide Better Handling by Widening the Wheelbase
  • Provide A Wider More Aggressive Look and Stance
  • Specifically Designed for your BMW
  • Guaranteed for the Life of your Vehicle
  • 10 Super Strong 10.9 Grade Extended Wheel Bolts Included
  • Light Weight Anodized Black 7075-T6 Aluminum
  • Special Pry Tabs on the Back for Easy Removal
  • 1-Piece Spacer with Hub-centric Factory Lip
  • Strong Solid Design & Appearance
  • Available in 10mm, 12mm, 15mm, 18mm, 20mm widths
  • F chassis X5 X6 X5M X6M - 15mm is the only size available
Spacers are also great for filling in the wheel well, creating clearance for aftermarket suspension, different wheel offsets, big brakes,` making your winter tires not look so inset or just making your BMW look awesome. BMS spacers are specifically designed and manufactured by Burger Motorsports for your BMW ensuring a perfect vibration free fit. Comes with a packet of anti-size grease to place on the factory hub to aid in later removal. 

Build & Quality: Each Burger Motorsports wheel spacer is CNC machined from high grade 7075-T6 aluminum alloy and anodized black for protection. Our BMW Wheel Spacers are sold in pairs (2pcs) with 10 extended lug bolts which exceed OEM standards. To do the whole car you will need 2 spacer kits. They are hub-centric and all sizes including 10mm have the factory hub on them. They are safe to use on iX (all wheel drive) BMW vehicles. 

Hub-Centric: Means our spacers center bore matches your factory BMW hub and the factory-like hub on the Burger Motorsports spacers matches the center bore in your wheel for a vibration free fit. 

What width wheel spacer should I get?
Spacer sizes are a matter of personal taste so only you will know what size you will like. Use a ruler to measure out from the top of the wheel/rim arch and see exactly where you want the wheel/rim to stick out to and order the appropriate size. What you see on the ruler, 10mm, 12mm out, etc. will be exactly where the rim will sit with the spacer size you choose. Burger Motorsports wheel spacers are only available in 10mm, 12mm, 15mm, 18mm, 20mm thickness. X5/X6 spacers only available in 15mm. 

Installation: Simply remove wheel, place spacer on the hub and bolt the wheel back up with the supplied longer lug bolts. 
Burger Motorsports BMW wheel spacers are an excellent, cost effective way to improve handling while dramatically enhancing the look of your BMW. Our wheel spacers push your rims and tires outward for an instant "fat" aggressive look, better lateral stability, and handling.
2,100,000.00Rp.
BMS Wheel Spacer for BMW - 12mm (BMS-12MMWS)
BMS Wheel Spacers for BMW
  • Provide Better Handling by Widening the Wheelbase
  • Provide A Wider More Aggressive Look and Stance
  • Specifically Designed for your BMW
  • Guaranteed for the Life of your Vehicle
  • 10 Super Strong 10.9 Grade Extended Wheel Bolts Included
  • Light Weight Anodized Black 7075-T6 Aluminum
  • Special Pry Tabs on the Back for Easy Removal
  • 1-Piece Spacer with Hub-centric Factory Lip
  • Strong Solid Design & Appearance
  • Available in 10mm, 12mm, 15mm, 18mm, 20mm widths
  • F chassis X5 X6 X5M X6M - 15mm is the only size available
Spacers are also great for filling in the wheel well, creating clearance for aftermarket suspension, different wheel offsets, big brakes,` making your winter tires not look so inset or just making your BMW look awesome. BMS spacers are specifically designed and manufactured by Burger Motorsports for your BMW ensuring a perfect vibration free fit. Comes with a packet of anti-size grease to place on the factory hub to aid in later removal. 

Build & Quality: Each Burger Motorsports wheel spacer is CNC machined from high grade 7075-T6 aluminum alloy and anodized black for protection. Our BMW Wheel Spacers are sold in pairs (2pcs) with 10 extended lug bolts which exceed OEM standards. To do the whole car you will need 2 spacer kits. They are hub-centric and all sizes including 10mm have the factory hub on them. They are safe to use on iX (all wheel drive) BMW vehicles. 

Hub-Centric: Means our spacers center bore matches your factory BMW hub and the factory-like hub on the Burger Motorsports spacers matches the center bore in your wheel for a vibration free fit. 

What width wheel spacer should I get?
Spacer sizes are a matter of personal taste so only you will know what size you will like. Use a ruler to measure out from the top of the wheel/rim arch and see exactly where you want the wheel/rim to stick out to and order the appropriate size. What you see on the ruler, 10mm, 12mm out, etc. will be exactly where the rim will sit with the spacer size you choose. Burger Motorsports wheel spacers are only available in 10mm, 12mm, 15mm, 18mm, 20mm thickness. X5/X6 spacers only available in 15mm. 

Installation: Simply remove wheel, place spacer on the hub and bolt the wheel back up with the supplied longer lug bolts. 
Burger Motorsports BMW wheel spacers are an excellent, cost effective way to improve handling while dramatically enhancing the look of your BMW. Our wheel spacers push your rims and tires outward for an instant "fat" aggressive look, better lateral stability, and handling.
2,100,000.00Rp.
BMS Billet 3.75" Exhaust Tips for BMW M3 M4 M5 M6 (BMS-S55ET)
Applications:

BMW M3
• 2015+ F80 M3

BMW M4
• 2015+ F82 F83 M4

BMW M5
• 2011+ F10 M5

BMW M6
• 2011+ F12 F13 M6

Available in :
• Ceramic Matte Black 


Upgrade your Factory M Exhaust Tips

The BMS billet 3.75" exhaust tips are the perfect choice for dressing up your factory M exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. They can be adjusted to desired length and are equipped with set screws so they go on easily and stay in place. 

Offered in three finishes. Silver, Anodized Black, and now available with our highest end longest lasting option Ceramic Black. The ultimate exhaust finish ceramic coating can withstand extreme temperatures up to 1200 degrees and provides a durable and great looking finish that rivals OEM quality and longevity. Made in the USA.

Not for use with M-Performance exhaust systems. Does not fit the M2 or any other BMW vehicles other than those listed above.

The BMS billet 3.75" exhaust tips are the perfect choice for dressing up your factory M exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. They can be adjusted to desired length and are equipped with set screws so they go on easily and stay in place.
4,700,000.00Rp.
BMS Chargerpipe M3/M4 S55 Black (BMS-S55CP)

BMW's new S55 motor is a modern marvel but one weakness we've identified are the boost tubes or charge pipes that connect the turbochargers to the intercooler. Made of thin plastic these factory parts are prone to snapping apart where the flange meets the tube, splitting along the length, and/or slipping out of their intercooler couplers.

Our BMS S55 replacement chargepipes are made from heavy duty aluminum and are designed with CNC flanges and a protruding lip for a secure OEM like fit. They are finished in a gloss black powder coat to match the engine bay and we've also incorporated a pre-capped 1/8" NPT bung in to each pipe. Includes replacement heavy duty couplers, hose clamps, and all hardware required for the installation.

For higher horsepower applications we also offer a heavy duty replacement cold side pipe complete with it's own 1/8" NPT bung, oring, throttle body clip, and coupler, for a fully plug and play upgrade.

Our BMS S55 replacement chargepipes are made from heavy duty aluminum and are designed with CNC flanges and a protruding lip for a secure OEM like fit. They are finished in a gloss black powder coat to match the engine bay and we've also incorporated a pre-capped 1/8" NPT bung in to each pipe. Includes replacement heavy duty couplers, hose clamps, and all hardware required for the installation.
6,100,000.00Rp.
AFE Power AIS P5R BMW M3/M4 F8x S55 (52-76305)

Note: Clearance Sale
New price:
arround IDR 27jt - 30jt.

Youtube doc: https://www.youtube.com/watch?v=gXmqEpkFRJA 

Result:
46%
flow increase
+17HP power
+19Lbs. torque

Unique One-Piece Housings:

The smooth one-piece sealed housings with auxiliary air inlet are used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. Large, clear sight windows are used for a hassle-free filter inspection and an aggressive style.

Roto-mold Tubes:
This System uses CAD designed, dyno-tuned, roto-molded intake tubes to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Intake Tube Accent:
High gloss clear-coated 2 x 2 twill weave Carbon Fiber to have that underhood motorsport appeal.

Large 3-Layer "Oil-Free" Performance Air Filters:
This intake system utilizes oil-free, large 5" tall conical 360 degree radial flow performance air filters with 3-Layer progressively finer porosity synthetic media for maximum convenience.

Large 5-Layer Performance Air Filters:
This sealed intake system utilizes pre-oiled, large 5" tall conical 360 degree radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Premium Hardware:
Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

+17 HP / +19 lbs. x ft. Torque max gains Outflows factory intake system by 46% Dual CAD-Designed Roto-Molded Intake Tubes Dual One-Piece Sealed Housings with Auxiliary Air Inlets Built-In Sight Windows Provides Easy Inspection of Filters Without Disassembly Stunning Carbon Fiber accent on driverside intake tube for that motorsport appearance Includes both Pro DRY S oil-free & Pro 5R oiled, washable/reusable performance air filters
21,000,000.00Rp.
AFE Power AIS P5R BMW E92 M3 (Magnum FORCE Stage-2 Si Pro 5R Cold Air Intake System)

Result:
+48%flow increase
+6HPpower
+6Lbs.torque

Roto-Molded Housing:

A custom CAD designed housing made from heat soak resistant cross-linked polyethylene is used to reduce the number of components and ensure the coolest air intake charge available.

Carbon Fiber Finish Trim Cover:
This carbon fiber finish trim cover is constructed with lightweight vacuumed formed ABS plastic for a sleek appearance.

Roto-Molded Tube:
A CAD designed, dyno-tuned intake tube allows for maximum power gains while maintaining a perfect fit and retaining OE connections.

Large 5-Layer Performance Air Filter:
This aFe Power Pro 5R, 6-1/2" tall, 360 degree radial performance air filter features five layers of progressively finer mesh cotton gauze media. The washable and reusable filter is surrounded by a 100% polyurethane frame, allowing for multiple cleaning cycles and an extra long filter life.

Premium Components:
Stainless steel clamps, a silicone coupler, and a silicone hose are provided for strength and durability while also providing the most secure installation available. Magnum FORCE Stage-2 Si intakes are designed with fewer parts for a fast and easy installation.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Draw more attention under your hood with this carbon fiber accented cold air intake system. Its sealed housing delivers 48% more cold air to your V8 than your M3’s stock configuration. With a unique filter-to-housing interface and minimal parts, this system is a breeze to install.
Out of Stock
14,850,000.00Rp.
AFE Power AIS P5R Black Series BMW M3/M4 F8x S55 (54-76305-CF)

Note: Clearance Sale
New price:
arround IDR 27jt - 30jt.

Youtube doc: https://www.youtube.com/watch?v=gXmqEpkFRJA 

Result:
46%
flow increase
+17HP power
+19Lbs. torque

Unique One-Piece Housings:

The smooth one-piece sealed housings with auxiliary air inlet are used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. Large, clear sight windows are used for a hassle-free filter inspection and an aggressive style.

Roto-mold Tubes:
This System uses CAD designed, dyno-tuned, roto-molded intake tubes to achieve maximum power gains while maintaining a perfect fit.

Carbon Fiber Intake Tube Accent:
High gloss clear-coated 2 x 2 twill weave Carbon Fiber to have that underhood motorsport appeal.

Large 3-Layer "Oil-Free" Performance Air Filters:
This intake system utilizes oil-free, large 5" tall conical 360 degree radial flow performance air filters with 3-Layer progressively finer porosity synthetic media for maximum convenience.

Large 5-Layer Performance Air Filters:
This sealed intake system utilizes pre-oiled, large 5" tall conical 360 degree radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Premium Hardware:
Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

+17 HP / +19 lbs. x ft. Torque max gains (*Vehicle tested with Pro 5R air filter media) Outflows factory intake by 46% 100% twill weave carbon fiber housings and tubes Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance Serialized Black Series plate for authenticity Washable and Reusable for Multiple Cleaning Cycles
44,980,000.00Rp.
BMS Ultralight Titanium Lug Bolts for BMW F Series (F Chassis BMS Titanium Lug Bolts for BMW 20 Lug Bolts)
F Chassis Titanium Bolts 
Replaces OEM BMW Part Number 36136781151 WHEEL BOLT M14X1.25
Package: 20 Lug Bolts.

Titanium is known for its superior strength, light weight and corrosion resistance. This set of OEM style Grade 5 Titanium Lug Bolts is not only stronger than stock but weigh 45% less. A net savings of about a pound of rotating weight total. Every pound counts in racing. Available in natural titanium color, matte black, and gold. These commplement facotry and aftermarket wheels well. Great for the i3 and I8. Every pound counts.
Titanium is known for its superior strength, light weight and corrosion resistance. This set of OEM style Grade 5 Titanium Lug Bolts is not only stronger than stock but weigh 45% less. A net savings of about a pound of rotating weight total. Every pound counts in racing. Available in natural titanium color, matte black, and gold. These commplement facotry and aftermarket wheels well. Great for the i3 and I8. Every pound counts.
Out of Stock
5,450,000.00Rp.
BMS Ultralight Titanium Lug Bolts for BMW E Series (E Chassis BMS Titanium Lug Bolts for BMW 20 Lug Bolts)
E Series Titanium Bolts 
Replaces OEM BMW Part Number 36136781150 WHEEL BOLT M12X1.5
Package: 20 Lug Bolts.

Colour: Black, Gold, Natural

Titanium is known for its superior strength, light weight and corrosion resistance. This set of OEM style Grade 5 Titanium Lug Bolts is not only stronger than stock but weigh 45% less. A net savings of about a pound of rotating weight total. Every pound counts in racing. Available in natural titanium color, matte black, and gold. These commplement facotry and aftermarket wheels well. Great for the i3 and I8. Every pound counts.
Titanium is known for its superior strength, light weight and corrosion resistance. This set of OEM style Grade 5 Titanium Lug Bolts is not only stronger than stock but weigh 45% less. A net savings of about a pound of rotating weight total. Every pound counts in racing. Available in natural titanium color, matte black, and gold. These commplement facotry and aftermarket wheels well. Great for the i3 and I8. Every pound counts.
Out of Stock
5,450,000.00Rp.
Custom Billet 4" Exhaust Tips (CP-ET4)
Applications:

Universal car. Include with installation fee. 
You can install it plug and play easier. Do it your self or install on your nearest workshop.

Available in :
• Polish/chrome


Upgrade your Factory Exhaust Tip

Price for 1 piece.
Custom billet 3.75" exhaust tips by Cockpit Auto as local choices for dressing up your factory exhaust outlets. 27% bigger than stock these unique billet tips are sure to turn heads. They can be adjusted to desired length and are equipped with set screws so they go on easily and stay in place.
850,000.00Rp.
Per Page      1 - 10 of 10
  • 1